| Customization: | Available |
|---|---|
| After-sales Service: | Yes |
| Principle: | Radar Level Transmitter |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
High Frequency Stainless Steel Non Contact Radar Tank Level Transmitter
This series of radar level meter adopted 26G high-frequency radar sensor, the maximum measurement range can reach up to 70 meters. The antenna is optimized further processing, the new fast microprocessors have higher speed and efficiency can be done the signal analysis, the instrumentation can be used for reactor, solid silo and very complex measurement environment.
Features of silo level measurement
1) Small antenna size, easy to install; Non-contact radar, no wear, no pollution.
2) Almost no corrosion, bubble effect; almost not affected by water vapor in the atmosphere, the temperature and pressure changes.
3) Serious dust environment on the high-level meter work has little effect.
4) A shorter wavelength, the reflection of solid surface inclination is better.
5) Beam angle is small, the energy is concentrated, can enhance the ability of echo and to avoid interference.
6) The measuring range is smaller, for a measurement will yield good results.
7) High signal-to-noise ratio, the level fluctuation state can obtain better performance.
8) High frequency, measurement of solid and low dielectric constant of the best choice
| Scope of measurement | 0.08~150 m |
| Measurement resolution | 3 cm 3 |
| Measuring accuracy | mm ±1 |
| Beam angle | 3° |
| Use of dielectric constant ranges | >=2 |
| Power supply range | 21~24 VDC,4-wire system (<1 W) |
| Mode of communication | HART/MODBUS bus |
| Signal output | ~20 mA (with Hart bus) or RS-485 |
| Fault output | 3.8 mA,4mA,20mA,22mA, Maintenance |
| Field operations/programming | 128×64 dot matrix display screen/4 key Configure Upper Locator Setup Software |
| Industrial temperature/humidity | -4~85ºC≤95 per cent |
| Shell material | Aluminum alloy, stainless steel |
| Type of antenna | Lens antenna with lens antenna shield / antiseptic antenna / antenna radiator / quartz isolation flange |
| Process pressure | -0.1~2 MPa |
| Product size | Ø100*270mm |
| Cable entrance | M 20*1.5 |
| Recommended cable | AWG18 or 0.75 mm² |
| Protection level | IP68 |
| Explosion proof rating | |
| Installation mode | Thread or flange |
| Net/Gross weight | Kg/2.995Kg 2.480 |
| Box size | 600*300*300 mm |
Q: Are you trading company or manufacturer ?
A: We are a manufacturer, committed to producing high accuracy, long-term stability, cost-efficient pressure/ level/ temperature measuring instruments.
Q: What's your quality control system?
A: All of our products are completed with temperature compensation and 48 hours aging test before shipment. And all of our products will be fully pre-inspection by QC departments before shipping to you . We have the certification of ISO,CE we could send the certification test of our company to you.
Q: What is the warranty of your products?
A: 2 years for level transmitter and pressure transmitter series others are 5 years from shipment date, for non-man-made damages.
Q: What is your shipping method?
A: Small orders are delivered with DHL, FedEx, TNT, UPS , EMS. Large orders are recommended to ship by sea.
Q: Do you provide samples ?
A: Yes,we have materials in stock to help you to get the samples as soon as we can.
Q: How long will you give me the reply?
A: We can support you 24Hours online service via email, skype, what'sapp, facebook etc within 1 hour.
){kind=link}